Subaru CROSSTREK HYBRID 2016 Owner's Manual page 424

CAUTION
. Park your vehicle in a safe loca-
tion on a flat, hard surface.
. The flat tire repair kit is designed
only for tires of the specified tires
of a non-specified size or other
purposes. For the specified tire
size, refer to the tire placard
located on the driver s door pil-
lar.
. Store the flat tire repair kit only in
its original location, locked into
place by the locking plate. Other-
wise, it could fly out if the brakes
are applied suddenly, resulting in
unexpected injury.
How to seal a tire
Take out the compressor from the case
before use and place it on a flat surface
near the tire.
1. Make sure the compressor power
switch (1) is in the (off) position.
In case of emergency/In case of a flat tire
2. Pull out the hose (2) and power cable
(3) from the back of the compressor.
3. Shake the sealant bottle (4) well, and
then twist open the cap (5).
CAUTION
One bottle of sealant is sufficient for
only one tire. Do not re-use sealant.
NOTE
When working in temperatures below
the freezing point, it is recommended
that you keep the bottle warm inside
the vehicle before using the sealant.
9-7
CONTINUED