Registering A Pin Code - Subaru CROSSTREK HYBRID 2016 Owner's Manual

Table of Contents

Advertisement

2-18
Keys and doors/PIN Code Access

Registering a PIN code

Preparation
1. Turn off the ignition switch.
2. Close all doors (including rear gate).
3. Press and hold the
button on the
access key. Then all doors (including rear
gate) will be locked.
4. Keep the
button pressed, and
press the rear lock button within 5
seconds after step 3.
5. Press and hold the rear lock button for
more than 5 seconds. Then a chirp will
sound.
6. Release the
button and rear lock
button.
7. Press the
button on the access key
while the chirp sounds.
Then the chirp will stop and the prepara-
tion is complete.
NOTE
If you do not press the
the access key, the chirp will sound for
30 seconds. In this case, the prepara-
tion for registering a PIN code does not
complete even if the chirp stops.
Registration
For example, to register 32468 as the
PIN code, perform the following proce-
dure.
1. Press the rear lock button three times.
2. After a buzzer (ding) sounds once,
press the rear lock button twice.
3. After a buzzer (ding) sounds once,
press the rear lock button four times.
4. After a buzzer (ding) sounds once,
press the rear lock button six times.
5. After a buzzer (ding) sounds once,
press the rear lock button eight times.
6. Perform steps 1 to 5 again within
approximately 30 seconds after the buz-
zer starts sounding intermittently.
7. All doors (including rear gate) will be
unlocked and locked. Then the PIN code
will be registered.
NOTE
. Press the rear lock button ten times
button on
to enter 0 .
. Change the PIN code frequently to
protect your vehicle from theft.
. If you have lent your vehicle to
another person, confirm that the PIN
code has not been changed or deleted.
If the PIN code has been changed or
deleted, reregister a new PIN code.
. If you make an error during the
registration procedure, press the
or
button on the access key.
Then, start over from the procedure
described in Preparation .
. To protect your vehicle from theft,
you cannot register a string of the
same five numbers together, such as
00000 , nor 12345 as a PIN code.
. Do not register your vehicle license
plate number or simple numbers such
as 11122 or 12121 as a PIN code.
Doing so will increase the risk of
vehicle theft.
. When you try to register
the registered PIN code will be deleted.
You cannot unlock the doors by PIN
Code Access until a new code is
registered.
. After registering a new PIN code,
make sure that you can unlock the
doors using the PIN code.
. The PIN code cannot be deleted
while the keyless access function is
disabled by operating the access key.
. Reregister the PIN code in the
following case.
when you forget the PIN code
when you want to change the PIN
code
22222 ,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crosstrek 2016

Table of Contents