Replacing Key Battery; Battery Replacement Timing; Safety Precautions; Replacing Access Key Battery - Subaru CROSSTREK HYBRID 2016 Owner's Manual

Replacing key battery

Battery replacement timing

The access key battery may be dis-
charged under the following conditions.
. The operation of the keyless access
function is unstable
. The operating distance of the remote
keyless entry system is unstable
. The access key does not operate
properly when used within the standard
distance
Replace the battery with a new one.

Safety precautions

CAUTION
. Do not let dust, oil or water get on
or in the access key when repla-
cing battery.
. Be careful not to touch or da-
mage the printed circuit board in
the access key when replacing
the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
. There is a danger of an explosion
if the battery is incorrectly re-
placed. Replace only with the
same or equivalent type of the
battery.
. Batteries should not be exposed
to excessive heat such as bright
sunlight, fire or the like.
NOTE
. Replace only with the same or
equivalent type of battery recom-
mended by the manufacturer.
. Dispose of used batteries according
to local laws.
. Mount the battery in the correct
orientation to prevent fluid leakage.
Be careful not to bend the terminals. It
may result in a malfunction.
. It is recommended that the battery
be replaced by a SUBARU dealer.
. Use a new battery.
. After replacing the battery, confirm
that the access key functions properly.
Maintenance and service/Replacing key battery

Replacing access key battery

CAUTION
When removing or reinstalling the
access key cover, make sure that
the plastic part does not come off or
become misaligned.
Battery: Button battery CR2032
1) Release button
2) Mechanical key
1. Take out the mechanical key.
11-45
CONTINUED