Bsd/Rcta Off Switch - Subaru CROSSTREK HYBRID 2016 Owner's Manual

7-44
Starting and operating/BSD/RCTA
System malfunction indicator
System malfunction indicator
This indicator flashes when a malfunction
occurs in the system. Contact a SUBARU
dealer and have the system inspected.

BSD/RCTA OFF switch

BSD/RCTA OFF switch
BSD/RCTA OFF indicator
If the BSD/RCTA OFF switch is pressed,
the BSD/RCTA OFF indicator on the
combination meter will illuminate, and the
BSD/RCTA is deactivated.
Press the switch again to activate the
BSD/RCTA. The BSD/RCTA OFF indica-
tor will turn off.
NOTE
. In the following cases, the system
may not operate properly due to
blocked radar waves. Press the BSD/
RCTA OFF switch to deactivate the
system.
When a bicycle carrier or other
item is fitted to the rear of the
vehicle
When using a chassis dynam-
ometer or free roller device, etc.
When running the engine and
making the wheels rotate while
lifting up the vehicle
. If the ignition switch is turned to the
OFF position, the last known status
of the system is maintained. For exam-
ple, if the ignition switch is turned to
the OFF position with the BSD/RCTA
deactivated, the BSD/RCTA will remain
deactivated the next time the ignition
switch is turned to the ON position.
. If the vehicle battery is disconnected
due to situations such as battery
terminal or fuse replacement, after the
battery is reconnected, the BSD/RCTA
will be activated.