Hazard Warning Flasher; Meters And Gauges; Canceling The Function For Meter/Gauge Needle Movement Upon Turning On The Ignition Switch - Subaru CROSSTREK HYBRID 2016 Owner's Manual

Hazard warning flasher

The hazard warning flasher is used to
warn other drivers when you have to park
your vehicle under emergency conditions.
The hazard warning flasher works regard-
less of the position of the ignition switch.
To turn on the hazard warning flasher,
push the hazard warning button on the
instrument panel. To turn off the flasher,
push the button again.
NOTE
When the hazard warning flasher is on,
the turn signals do not work.

Meters and gauges

NOTE
Some of the meters and gauges on the
combination meter use liquid-crystal
displays. You will find their indications
hard to see if you wear polarized
glasses.
Combination meter illumina-
tion
When the ignition switch is turned to the
ON position, various parts of the combi-
nation meter will illuminate in the following
sequence.
1. Warning lights, indicator lights, meter
needles, gauge needles and liquid crystal
display illuminate.
2. Meter and gauge indications each
show MAX position.
3. Meter and gauge indications each
show MIN position.
4. Regular illumination (for driving) be-
gins.
Instruments and controls/Hazard warning flasher
Canceling the function for
meter/gauge needle move-
ment upon turning on the
ignition switch
It is possible to activate or deactivate the
movement of the meter needles and
gauge needles that takes place when the
ignition switch is turned to the ON
position. To change the setting, perform
the following procedure.
1. Turn the ignition switch to the OFF or
ACC position.
1) Trip knob
2) Select knob
2. Press the trip knob or the select knob
to show or
display.
3-5
on the trip meter
CONTINUED