Table of Contents
Advertisement
Push-button ignition switch
Safety precautions
Refer to Safety precautions
Operating range for push-
button start system
1)
Antenna
2)
Operating range
NOTE
. If the access key is not detected
within the operating range of the an-
tennas inside the vehicle, the push-
button ignition switch and the hybrid
system start cannot be operated.
. Even when the access key is outside
the vehicle, if it is placed too close to
the glass, it may be possible to switch
the power or to start the hybrid system.
. Do not leave the access key in the
following places. It may become im-
2-3.
possible to operate the push-button
ignition switch and the hybrid system
start. It may also cause a false warning
to issue although no malfunction actu-
ally occurs, or not to issue a warning
when any malfunction occurs.
On the instrument panel
On the floor
Inside the glove box
Inside the door trim pocket
On the rear seat
At the cargo area
. When operating the push-button
ignition switch or starting the hybrid
system, if the access key battery is
discharged, perform the procedure
described in Access key
key does not operate properly
In such a case, replace the battery
immediately. Refer to
cess key battery
Instruments and controls/Push button ignition switch
Switching power status
1)
Operation indicator
2)
Push-button ignition switch
The power status is switched every time
the push-button ignition switch is pressed.
1. Carry the access key, and sit in the
driver s seat.
if access
2. Shift the select lever into the P
9-23.
position.
3. Press the push-button ignition switch
Replacing ac-
without depressing the brake pedal. Every
11-45.
time the button is pressed, the power is
switched in the sequence of
ACC , ON and OFF . When the hybrid
system is stopped and the push-button
ignition switch is in ACC or ON , the
operation indicator on the push-button
ignition switch illuminates in orange.
3-3
OFF ,
CONTINUED
Advertisement
Chapters
Table of Contents
