Pedestrian Alert Warning Light; Hybrid Ready Indicator Light; Ev (Electric Vehicle) Mode Lamp - Subaru CROSSTREK HYBRID 2016 Owner's Manual

CAUTION
When the Hybrid Fail Lamp is illu-
minated, an interruption screen will
be displayed simultaneously on the
multi function display. Perform the
procedure shown on the multi func-
tion display, then have your vehicle
inspected by a SUBARU dealer im-
mediately.
Pedestrian alert warn-
ing light
This light illuminates when a malfunction
occurs in the pedestrian alert system.
Hybrid READY Indica-
tor Light
This light illuminates when the hybrid
system has started. It turns off when the
hybrid system has been turned off.
CAUTION
If the Hybrid READY Indicator Light
does not illuminate when the engine
has been started, have your vehicle
checked at a SUBARU dealer.
Instruments and controls/Warning and indicator lights
EV (Electric Vehicle)
mode lamp
This light illuminates in the following
cases.
. When driving only using the electric
motor power
. When the engine is automatically
stopped by the hybrid system
Activation/deactivation settings
The EV (Electric Vehicle) mode lamp can
be activated or deactivated. To change the
setting, perform the following procedure.
1. Turn the ignition switch to the LOCK
or ACC position.
2. Press the trip knob to show
on the trip meter display.
The display can be switched as shown in
the following sequence by pressing the
trip knob.
*1: Cannot be displayed when the ignition
switch is in the ON position.
*2: Displayed only for models with BSD/
RCTA.
To change the current setting, press the
trip knob for at least 2 seconds.
: Activated
: Deactivated
or
3-29
CONTINUED