"Ec Verification" - A Service Offered By Sartorius - Sartorius IS 150 IGG-H Installation And Operating Instructions Manual

"EC Verification" - A Service Offered by Sartorius

Our service technicians authorized to perform the verifcation* of your weighing
instruments which are acceptable for legal metrological verification can inspect
and verify the metrological specifications at the place of installation within the
Member States of the European Union and the Signatories of the European
Economic Area.
"New Installation" Service
Initial verification is covered in our "New Installation" service package. In
addition to initial verification, this package provides you with a series of
important services which will guarantee you optimal results in working with your
weighing instrument:
– Installation
– Startup
– Inspection
– Training
– Initial verification
If you would like Sartorius to perform initial verification of your weighing
instrument, contact an authorized service representative. Please refer to the
Sartorius European Service Center Addresses on page 39.
Subsequent Verifications within the European Countries
The validity of the verification will become void in accordance with the
national regulations of the country in which the weighing instrument is used.
For information on verification and legal regulations currently applicable in your
country, and to obtain the names of the persons to contact, please contact your
local Sartorius office, dealer or service center as indicated on the following
page.
*
in accordance with the accreditation certificate issued to Sartorius in accordance with the accreditation certificate issued to Sartorius in accordance with the accreditation certificate issued to Sartorius in accordance with the accreditation certificate issued to Sartorius
47