A Service Offered By Sartoriusr - Sartorius IS 150 IGG-H Installation And Operating Instructions Manual

A Service Offered by Sartorius
"EC Verification" - A Service Offered by Sartorius
Our service technicians authorized to perform the verifcation* of your weighing
instruments which are acceptable for legal metrological verification can inspect and
verify the metrological specifications at the place of installation within the Member
States of the European Union and the Signatories of the European Economic Area.
"New Installation" Service
Initial verification is covered in our "New Installation" service package. In addition to
initial verification, this package provides you with a series of important services which
will guarantee you optimal results in working with your weighing instrument:
– Installation
– Startup
– Inspection
– Training
– Initial verification
If you would like Sartorius to perform initial verification of your weighing
instrument, contact an authorized service representative. Please refer to the
Sartorius European Service Center Addresses on page 39.
Subsequent Verifications within the European Countries
The validity of the verification will become void in accordance with the national
regulations of the country in which the weighing instrument is used. For information
on verification and legal regulations currently applicable in your country, and to
obtain the names of the persons to contact, please contact your local Sartorius office,
dealer or service center as indicated on the following page.
* in accordance with the accreditation certificate issued to Sartorius
45
Installation Instructions