Sartorius IS 150 IGG-H Installation And Operating Instructions Manual page 49

PC adapter cable, 25-pin D-Submini – 9-contact
D-Submini 0.25 m long (YDO 52 IS and YCC 01-0017D2
required)
Special menu access locking device, IP65 (for
legal metrology); for external positioning of the menu
access lock on weighing platforms built into systems.
If this device is used, a tag plate for ID labels is not
required.
Upgrade kit for DC power supply to
the weighing platform (without using an external
AC adapter or power supply; the AC adapter does
not come standard with this accessory)
IP67 cable gland (to be installed by an authorized
service technician only)
External rechargeable battery pack; hours of
operation approx. 28
(YAS03IS required)
IP65 AC adapter, 3-m primary cable,
1.5-m secondary cable; to be installed by an authorized
service technician only (YAS03IS required)
for 220 V
for 110 V
Adapter cable for connecting the weighing
platform to a 12-V car battery or to a separate
12-V power source using the terminal leads; cable length:
3.7 m ( ∼ 12 ft.); with integrated switch and fuse,
reverse battery polarity protection; to be installed, using
the YAS03IS, by an authorized service technician only
6965619
YAS 02 IS
YAS 03 IS
YRB 06 Z
6971899
6971500
YRB 01 IS
49