Connection To The Monitor - videotronic HQ-IDC-23012P Operating Instructions Manual

Connecting the Device
2.2

Connection to the Monitor

G Connect the output socket <VIDEO−Out> (D) to the input socket <VIDEO−In>
on your monitor.
Caution: Risk of damage! Only connect the camera to the monitor when both
components are disconnected from the mains supply!
Note: Follow the original operating instructions for the monitor!
CCD camera
Fig. 6

Connection to the monitor

Note: To transmit the video signal, a coaxial cable (75
between the camera and the monitor.
The maximum transmission distance without equalizer is approximately 300 m
for coaxial cables (RG 59).
If the transmission distance is greater than 300 m, the video signal has to be
processed with a video equalizer (e.g. KEV).
It is also possible to transmit video signals (with additional devices) over
substantial distances by means of twisted−pair cables
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED
D
Monitor
Ω
) is normally installed
17