Blc (Backlight Compensation) - videotronic HQ-IDC-23012P Operating Instructions Manual

Configuration
3.2.5

BLC (Backlight Compensation)

In this menu you can activate the backlight compensation function. If a bright
point of light shines into the camera opening, the dark areas next to this point
can no longer be identified. This function allows you to compensate for this
effect.
G Move the arrow
to the <BLC> menu.
G Press the <ENTER> key to open up the
input mode.
G Press <UP> or <DOWN> to change the
selection from OFF to ON.
G Press the <ENTER> key to access the
submenu selected.
OFF
This selection disables the backlight compensation.
ON
This selection enables the backlight compensation and you then have to adjust
further settings. You can specify in which AREA the compensation should take
place, and also define the LEVEL of the compensation.
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED
with the <Down> key
SETUP MENU [1/4]
CAMERA ID
SENSE UP
AISHUT
AES
BLC
AGC
Fig. 21 BLC
ON.
OFF
AUTO.
FIX.
OFF
+7
27