Table of Contents
Advertisement
Annex
Video
Y/C
12 V DC
Remote control
No liability accepted for any errors, changes or omissions.
4.2
Troubleshooting
Fault
No picture
Grainy picture
Picture too bright
Blurred video picture − Focus not correctly adjusted
Distorted picture
Double picture
Please contact your authorized dealer with an exact failure description if none
of the above−mentioned remedial measures fixes your problem.
4.3
Dimensions
Fig. 66
Dimensions of housing
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED
BNC
Mini 4−pole DIN
terminal screw
multifunction socket
− No operating voltage
− Video connection interrupted
− Inadequate lighting conditions
− Luminous intensity of the peak too high, change
camera location
or activate the backlight function of the camera
− Heating device in camera housing is faulty (when
used outdoors); fogging on front glass of the camera
housing
− Different earthing potentials between camera and
monitor, use optocoupler (e.g. from VPT videotronic
− Faulty 75−Ω connection
− Break in insulation of video cable
86.5
All data in mm.
Remedy
50.2
63.5
51
Advertisement
Table of Contents
