3.2.4
AES (Electronic Shutter)
In this menu you can activate the electronic shutter. If the brightness values are
very high, you can prevent glare by reducing the exposure time.
G Move the arrow
to the <AES> menu.
G Press the <ENTER> key to open up the
input mode.
G Press <UP> or <DOWN> to change the
selection from AUTO to FIX.
G Press the <ENTER> key to enter the input
mode of the submenu selected.
Auto
In this submenu you activate the automatic control function for the electronic
shutter.
Note: Setting 7 corresponds to a short exposure time, Setting 1 to a long
exposure time. Short exposure times may result in underexposure.
FIX
In this submenu you can enter the exposure time manually. The selection
intervals are given in seconds.
G Press the <UP> or <DOWN> keys to
change the settings.
G Press the <ESC> button twice to quit the
menu.
' This will take you back to the setup
menu.
26
with the <Down> key
SETUP MENU [1/4]
CAMERA ID
SENSE UP
AISHUT
AES
BLC
AGC
Fig. 19
AES
AES
FIX LEVEL
Fig. 20
AES
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED
Configuration
ON.
OFF
AUTO.
FIX.
OFF
+7
1/20