Order No. M578527Ac/112003 - videotronic HQ-IDC-23012P Operating Instructions Manual

AREA
G Press the <ENTER> key to open the input
mode.
G Move the flashing zone indicator (A) to
the area you wish to select, e.g. (B), using
the <UP> or <DOWN> keys and press the
<ENTER> key.
' This area will be selected and then
appears in grey.
G Move the flashing zone indicator (C) to
the next area you wish to select using the
<UP> or <DOWN> keys and press the
<ENTER> key.
G Select all zones using the method
described above.
G Press the <ESC> key to quit the
submenu.
LEVEL
In this menu you can vary the
compensation settings.
G Move the arrow
to the <LEVEL> submenu.
G Press the <ENTER> key to open the input
mode.
G Press the <UP> or <DOWN> keys to
change the values.
You can choose from 8 different values.
MIN; 1...6; MAX.
G Press the <ESC> key twice to quit the
function.
' This will take you back to the setup menu.
28
with the <Down> key
A B C
Fig. 22 BLC
BLC
BLC AREA
BLC LEVEL
Fig. 23 BLC
HQ−IDC−23012P

Order No. M578527AC/112003

© 2003 videotronic gmbh
ALL RIGHTS RESERVED
Configuration
+4