Connecting The Monitor To The Video Out Socket Of The Camera; Mains Connection - videotronic HQ-IDC-23012P Operating Instructions Manual

2.2.1

Connecting the Monitor to the VIDEO OUT socket of the camera

G Connect the <VIDEO−Out> socket (E) to the input socket <VIDEO−In> on your
monitor or intermediate monitor.
G If you have an intermediate device, set the <75/Hi−Z> selection switch as
shown below.
CCD camera
E
Fig. 7 Connection to the monitor
2.3

Mains connection

Caution: Risk of damage and injury! Only connect the camera to the mains
after installation is complete!
G Connect the mains plug <F> to the electricity supply
(DC 12V/400mA).
Note:Check the polarity.
The red PL LED (G) only lights up if the poles are correctly connected.
Fig. 8

Mains connection

18
Intermediate monitor
F
G
Connecting the Device
Terminal moni-
tor
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED