Order No. M578527Ac/112003 - videotronic HQ-IDC-23012P Operating Instructions Manual

LOAD
This submenu is where you load the stored positions.
G Press the <ENTER> key to open the input
mode.
G Press the <UP> or <DOWN> keys to
select the individual storage locations.
G Press the <ESC> key to quit the
submenu.
ALARM
This submenu is where you can allocate one of the stored positions to the
alarm input. The position will then be loaded according to your allocation when
an alarm is received.
G Press the <ENTER> key to open the input
mode.
G Press <UP> or <DOWN> to select an
alarm position (OFF, 1 to 64).
G Press the <ESC> key twice to quit the
menu.
' This will take you back to the setup
menu.
36
POSITION LOAD
POSITION LOAD
Fig. 39 POSITION
ALARM POSITION
ALARM POSITION
Fig. 40 POSITION
HQ−IDC−23012P

Order No. M578527AC/112003

© 2003 videotronic gmbh
ALL RIGHTS RESERVED
Configuration
3
3