Pitney Bowes da95f Operator's Manual page 69

Misfeed (feeds
double) or
skewing
SV61749 Rev. D
Separator Assembly
not set correctly.
Side guide set
incorrectly.
Media thickness
knob set too thick.
Media out of
specification.
Media sticking
together
Seperator hex nut is
not locked
Separator roller is
worn.
Stuffed envelopes
not feeding properly.
Troubleshooting • 4
Adjust separator assembly
to thickness of material. See
Chapter 2, Printer Basics.
Check Side Guide position. See
Chapter 2, Printer Basics.
Reduce setting. See Chapter 2,
Printer Basics.
Refer to Appendix A-
Specifications.
Fan media before loading
Move blue hex nut to right to
locked position. See Setting the
Separators to Account for Normal
Wear in Printer Maintenance.
Using blue hex lock, move roller
to a new numbered position.
See Setting the Separators to
Account for Normal Wear in
Printer Maintenance.
Separator roller may need
replacement; call service.
Try running envelopes unstuffed.
4-5