Pitney Bowes da95f Operator's Manual page 26

2 • Printer Basics
C. Tighten the clamp knob to secure the print head module in place.
D. Repeat steps A through C for print head Module B.
E. Feed a piece of media into the printer and then press the test
envelope button to print a test piece. Adjust the print heads as
necessary until the desired positions are achieved.
TIPS:
• The slotted areas of the print head modules (print zone)
should be located within the area of the side guides (see
illustration).
• If your software application is designed to work with this
printer it will provide specific coordinates for the print head
positions. Refer to your software layout when positioning the
print heads.
2-10 SV61749 Rev. D