Pitney Bowes da95f Operator's Manual page 2

NOTICE
The use of this information by the recipient or others for purposes other
than the repair, adjustment or operation of Pitney Bowes equipment may
constitute an infringement of patent and/or other intellectual property
rights of Pitney Bowes or others. Pitney Bowes assumes no responsibility
for any such use of the information. Except as provided in writing, duly
signed by an officer of Pitney Bowes, no license, either express or
implied, under any Pitney Bowes or any third party's patent, copyright, or
other intellectual property rights is granted by providing this information.
SV61749 Rev. D
First Edition, August, 2007.
©2007 Pitney Bowes Inc. All rights reserved.
This book may not be reproduced in whole or in part in any fashion or
stored in a retrieval system of any type or transmitted by any means,
electronically or mechanically, without the express written permission of
Pitney Bowes.
We have made every reasonable effort to assure the accuracy and
usefulness of this manual, however we can not assume responsibility
for errors or omissions or liability for the misuse or misapplication of our
products.
Envelope Designer and SmartMailer are registered trademarks of
Pitney Bowes, Inc. Microsoft and Windows are trademarks or registered
trademarks of Microsoft Corporation.
Conforms to the following:
FCC Rules
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
interference to radio communications. Operation of this equipment in a
residential area is likely to cause interference, in which case the user will
be required to correct the interference at his own expense.
For USB interface to a computer, use only a shielded USB cable.
CAUTION: Changes or modifications to this equipment not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.