Pitney Bowes da95f Operator's Manual page 28

2 • Printer Basics
IMPORTANT: Use these three guidelines to determine
placement of the rollers.
A. At least two rollers from each set (Module A and Module B)
must be in contact with the media to provide equal pressure.
That's a total of four rollers, two from Module A, two from
Module B.
NOTE: Some models may be equipped with eight
rollers to be used on wider media.
Modules"A"
Rollers
B. The rollers must be touching one of the wide black
feed belts.
Belts
2-12
Eight roller assemblies and four
belts shown. You may only have
four rollers
Modules "B"
Rollers
SV61749 Rev. D