Advertisement
DISASSEMBLY, AND INSPECTION OF CRANKCASE
Electrical System
Remove
engine
electrical
complete.
Mar k leads
for
reassembly.
harness
proper
Remove
35
amp
DC
alternator
and
drive belt.
Remove starter motor.
Remove the glow plugs.
Cooling System
Remove sea water
pump,
mounting
bracket,
thermostat housing,
ther-
mostat, pump drive belt, hoses and primary heat exchanger.
Remove exhaust manifold with idle stop
~ontrol
(fuel solenoid assembly
- generator model).
Fuel System
Remove electric fuel pump and engine mounted fuel filter assembly.
Remove high pressure liner from injection pump to injectors.
Remove fuel return line from injectors and to injection pump.
Remove injectors and sealing washers.
Cylinder Head
Remove rear lifting eye and rocker box cover with oil supply line.
Remove rocker arm assembly and push rods.
Remove
cylinder
head
hold
down
bolts
and
lift
cylinder
head
from
block.
Lift tappets out of block with use of a magnetic pencil.
Remove the oil pan and gasket.
Remove
transmission,
damper
plate and
bellhousing
(generator
-
see
generator section).
Remove the flywheel and backplate.
47
Advertisement
