SMC Networks HRZD020-WS-WS Operation Manual page 97

In the event of an error
1
2
3
4
Figure 5-83 "Purge Mode Screen": ERROR Window (E.g.: ALARM)
No. Item
1 TEMP OUT
2 ALARM
3 TIME OUT
4 IN RUNNING
HRZD Series
The ERROR window shown below is displayed when an error occurs that results
in the termination of ongoing circulating fluid recovery. Fluid collection is stopped
accordingly.
The lamp stated below comes on corresponding to error type.
Table 5-38 "Purge Mode Screen": ERROR Window
The circulating fluid temperature is out of the range.
(Circulating fluid temperature: Beyond the 10-to-30-°C range)
COM-01: Water Leak Detect FLT or CH*-07: Reservoir High Level WRN alarm is
raised. The Alarm List screen is displayed when other alarm is raised, and
circulating fluid recovery carries on.
Circulating fluid collection is not completed within the TIME-OUT period.
The product goes into action.
Chapter 5 Product Operation
Descriptions
HRX-OM-M005
5.3 Operation Screen
5-53