HRX-OM-M005
Chapter 5 Product Operation
Procedure for setting analog output signal SCALING
1.
Touch the [V Lo] key or [V Lo] key.
The "Ten-key screen" is displayed.
2.
Use the ten-key to input a set value, and
touch the [ENT] key.
The "CH1(2) Analog Output Setting screen 1, 2"
is displayed, and the box appears flashing.
3.
Touch the [Enter] key.
The "MESSAGE screen" is displayed.
5.3 Operation Screen
5-42
Figure 5-67 "CH1(2) Analog Output Setting Screen 1, 2"
[Tips]
The setting has not taken effect while the box is flashing.
A scaling must be specified to cause V Hi to be larger than V Lo (V Lo<V Hi).
Figure 5-69 "CH1(2) Analog Output Setting Screen 1, 2"
[Tips]
The setting has not taken effect while the box is flashing.
Figure 5-68 "Ten-key Screen"
HRZD Series