SMC Networks HRZD020-WS-WS Operation Manual page 74

HRX-OM-M005
Chapter 5 Product Operation
Procedure for specifying communication specifications and baud rate
1.
Touch the [SEL] key.
The box appears flashing. A set value changes
with each touch of the key.
2.
Touch the [Enter] key.
The "MESSAGE screen" is displayed.
3.
Touch the [YES] key.
The setting takes effect.
5.3 Operation Screen
5-30
[Tips]
The setting has not taken effect while the box is flashing.
[Tips]
The setting is not performed when the [NO] key is touched, which causes the
"Serial Communication Setting screen 2" where the box is flashing to be
displayed.
Figure 5-41 "Serial Communication Setting Screen 2"
Figure 5-42 "Serial Communication Setting Screen 2"
Figure 5-43 "MESSAGE Screen"
Box
HRZD Series