SMC Networks HRZD020-WS-WS Operation Manual page 75

Procedure for initializing communication specifications and baud rate
1.
Touch the [Initial] key.
The "MESSAGE screen" is displayed.
2.
Touch the [YES] key.
Initialization takes place.
HRZD Series
[Tips]
Initialization is not performed when the [NO] key is touched, which causes the
"Serial Communication Setting screen 2" to be displayed.
Chapter 5 Product Operation
Figure 5-44 "Serial Communication Setting Screen 2"
Figure 5-45 "MESSAGE Screen"
HRX-OM-M005
5.3 Operation Screen
5-31