SMC Networks HRZD020-WS-WS Operation Manual page 56

HRX-OM-M005
Chapter 5 Product Operation
Procedure for changing communication mode
1.
Touch the [Comm] key on the "Main
screen".
The "Mode Selection screen" is displayed.
2.
Touch "SERIAL" on the "Mode Selection
screen".
The name of "SERIAL" flashes.
3.
Touch the [Enter] key.
The "MESSAGE screen" is displayed.
5.3 Operation Screen
5-12
[Tips]
Mode selection has not taken place while the name of "SERIAL" is flashing.
[Tips]
With the touch of the [Cancel] key, the screen is switched to the "Mode
Selection screen" where "LOCAL" is selected.
Figure 5-16 "Main Screen"
Figure 5-17 "Mode Selection screen"
Figure 5-18 "Mode Selection screen"
HRZD Series