Procedure for setting analog output signal TYPE
1.
Touch the [TYPE] key.
The box appears flashing. A set value changes
with each touch of the key.
2.
Touch the [Enter] key.
The "MESSAGE screen" is displayed.
3.
Touch the [YES] key.
The setting takes effect.
HRZD Series
Figure 5-64 "CH1(2) Analog Output Setting Screen 1, 2"
[Tips]
The setting has not taken effect while the box is flashing.
Figure 5-65 "CH1(2) Analog Output Setting Screen 1, 2"
[Tips]
The setting is not performed when the [NO] key is touched, which causes the
"CH1(2) Analog Output Setting screen 1, 2" where the box is flashing to be
displayed.
HRX-OM-M005
Chapter 5 Product Operation
Figure 5-66 "MESSAGE Screen"
5.3 Operation Screen
5-41