SMC Networks HRZD020-WS-WS Operation Manual page 36

HRX-OM-M005
Chapter 3 Transporting and Installation
8.
Connect the power cables to the breaker terminal.
Be sure to use a crosshead screwdriver. Recommended torque: 6N•m
9.
Connect the grounding terminal (M8) of
the power cable to the earth bar.
Be sure to use a 13-mm open end wrench.
Recommended torque: 12.5 N•m
10.
Attach the breaker cover to the breaker.
11.
Close the front door.
12.
Connect the power cable to the power breaker on customer side (primary side).
Correct phase rotation is required when attaching the power cable to
the breaker terminal.
3.3 Procedure for Installation
3-12
Earth bar
Figure 3-9 Connection of Power Cable and Grounding Terminal
[Tips]
See "Table 3-1 Power Cable and Main Breaker (The Product)" on page 3-7
for torque value.
Power cable
Grounding
terminal
L1 L2
(R) (S)
L3
(T)
Main
breaker
HRZD Series