SMC Networks HRZD020-WS-WS Operation Manual page 81

Procedure for setting analog input signal TYPE
1.
Touch the [TYPE] key.
The box appears flashing. A set value changes
with each touch of the key.
2.
Touch the [Enter] key.
The "MESSAGE screen" is displayed.
3.
Touch the [YES] key.
The setting takes effect.
HRZD Series
[Tips]
The setting has not taken effect while the box is flashing.
[Tips]
The setting is not performed when the [NO] key is touched, which causes the
"CH1(2) Analog Input Setting screen 2" where the box is flashing to be
displayed.
Chapter 5 Product Operation
Figure 5-54 "CH1(2) Analog Input Setting Screen 1"
Figure 5-55 "CH1(2) Analog Input Setting Screen 1"
Figure 5-56 "MESSAGE Screen"
HRX-OM-M005
Box
5.3 Operation Screen
5-37