SMC Networks HRZD020-WS-WS Operation Manual page 82

HRX-OM-M005
Chapter 5 Product Operation
Procedure for setting analog input signal SCALING
1.
Touch the [V Lo] key or [V Lo] key.
The "Ten-key screen" is displayed.
2.
Use the ten-key to input a set value, and
touch the [ENT] key.
The "CH1(2) Analog Input Setting screen 1" is
displayed, and the box appears flashing.
3.
Touch the [Enter] key.
The "MESSAGE screen" is displayed.
5.3 Operation Screen
5-38
[Tips]
The setting has not taken effect while the box is flashing.
A scaling must be specified to cause V Hi to be larger than V Lo (V Lo<V Hi).
[Tips]
The setting has not taken effect while the box is flashing.
Figure 5-57 "CH1(2) Analog Input Setting Screen 1"
Figure 5-58 "Ten-key Screen"
Figure 5-59 "CH1 Analog Input Setting Screen 1"
HRZD Series