4.
Touch the [YES] key.
The setting takes effect.
Procedure for initializing RUN, REMOTE, and OUT1 to OUT6 settings
1.
Touch the [Initial] key.
The "MESSAGE screen" is displayed.
2.
Touch the [YES] key.
Initialization takes place.
HRZD Series
[Tips]
The setting is not performed when the [NO] key is touched, which causes the
"CH1(2) Analog Input Setting screen 1" where the box is flashing to be
displayed.
[Tips]
Initialization is not performed when the [NO] key is touched, which causes the
"CH1(2) Analog Input Setting screen 1" to be displayed.
Chapter 5 Product Operation
Figure 5-60 "MESSAGE Screen"
Figure 5-61 "CH1(2) Analog Input Setting Screen 1"
Figure 5-62 "MESSAGE Screen"
HRX-OM-M005
5.3 Operation Screen
5-39