SMC Networks HRZD020-WS-WS Operation Manual page 110

HRX-OM-M005
Chapter 8 Appendix
approx. 1 to 2L/min of facility water.
*10: The rated flow is a required flow rate to maintain cooling capacity and temperature stability. Always use the accessory "by-pass
piping set" if the fluid falls below the rated flow.
*11: This is the dimensions of panels, which is derived without protrusions such as a breaker handle.
*12: This is the mass of the system when it contains no circulating fluid.
*13: If the difference of elevation measures more than 10m, the level of the circulating fluid in 7-m or longer piping must be under a
sub tank capacity. The circulating fluid may boil or back-flow which causes overflow from the tank when the product is at a halt, if
disregarded.
8.1 Specification
8-2
HRZD Series