Advertisement
ASSEMBLY INSTRUCTIONS
STEP3： ： ： ：
1. Attach the Vertical Post (4) to the Main Base (1), using two M10×70mm Hex Bolts (69), four
M10 Washers (78) and two M10 Nylon Nuts (81).
2. Remove two M10×20mm Hex Bolts (72) and two M10 Washers (78) from two Weight Guide
Tubes (3).
3. Attach the Top Beam (5) to the two Weight Guide Tubes (3), using two M10×20mm Hex
Bolts (72) and two M10 Washers (78).
4. Attach the Top Beam (5) to the Vertical Post (4), using two M10×70mm Hex Bolts (69), four
M10 Washers (78) and two M10 Nylon Nuts (81).
5. Attach the two Single Pulley Brackets (22) to the Vertical Post (4), using two M10×65mm
Hex Bolts (70), four M10 Washers (78) and two M10 Nylon Nuts (81).
5
Advertisement
