Advertisement
ASSEMBLY INSTRUCTIONS
STEP5： ： ： ：
1. Attach the Butterfly Extension (6) to Vertical Post (4), using two M10×70mm Hex Bolts (69),
four M10 Washers (78) and two M10 Nylon Nuts (81).
2. Tap Oil Bushing (small) (43) to Right Adjustable Plate (16).
3. Slide Right Adjustable Plate (16) onto Right Butterfly Arm (8), then insert Quick Knob (long)
(66) through the single hole on the Right Adjustable Plate (16) to any one of the holes on the
fan-type plate.
4. Attach Right Butterfly Arm (8) to Butterfly Extension (6),using two Oil Bushings (small) (43),
one M16 Washer (77) and one M16 Nylon Nut (80).
5. Attach Handle Tube (14) to the Right Butterfly Arm (8), using two Oil Bushings (big), one
M10×20mm Hex Bolt (72) and one Washer (￠45X￠11) (76).
6. Assembly Left Butterfly Arm (7) and Left Adjustable Plate (15) with same method.
7
Advertisement
