Chapter 7: Service Mode; Using Service Mode; Service Mode Overview - Matrix T3X-05 Service Manual

7.1 USiNG SerViCe mode

1) To enter Service Mode, press & hold the INCLINE DOWN and
SPEED DOWN keys at the same time for 3-5 seconds until Manager
Mode appears on the display.
2) Press the INCLINE or SPEED keys until Service Mode appears on
the display (Figure A) and press ENTER.
3) To scroll between settings in the Service Mode, press the INCLINE
or SPEED keys.
4) Press ENTER to modify the settings once displayed.
5) Press any INCLINE or SPEED key to change the value of the set-
ting.
6) Press the PAUSE key to exit the setting without saving.
7) Once the setting is correct, press ENTER to save.
8) Press the EMERGENCY STOP to exit Service Mode..

7.2 SerViCe mode oVerVieW

Code defaUlT
Service 1 Display Test
Service 2 KeypadTest
Service 3 Distance / Time
Service 4 CSafe / RF Test
Service 5 Error Log
Service 6 Set Date / Time
Service 7 Export and Import Parameter
Service 8 WiFi Function
14

CHaPTer 7: SerViCe mode

oPTioNS deSCriPTioN
Press the ENTER key repeatedly to check each set of LEDs on the
display sequentially.
Press any key and the display should show the corresponding
message.
Distance: Manually sets the Accumulated Distance and Time.
Mile 0 - 99999
Kilometer0-160898
Time:
0 - 999999
Press the ENTER key to test CSafe. Press the ENTER key again
to test the RF module.
Shows the last 10 errors. Press and LEVEL UP and DOWN for 3
seconds to clear the errors.
Press the LEVEL keys to move cursor, the number keys to set date
/ time, and the ENTER key to save.
Export parameter : Export all parameter to USB
Import parameter 1: Import parameters to console without
accumulated distance and time and serial number.
Import parameter 2: Import parameters to console Include
accumulated distance and time and serial number.
Automatically detects the available IP address and displays it.
fiGUre a