Chapter 9: Part Replacement Guide; Motor Cover Replacement - Matrix T3X-05 Service Manual

CHaPTer 9: ParT rePlaCemeNT GUide

9.1 moTor CoVer rePlaCemeNT

1) Remove the 2 screws holding the motor cover to the frame using a 6 mm Allen wrench (Figures A).
2) The motor cover is secured to the frame with velcro, so you will have to pull up with some force (Figure B).
fiGUre a
fiGUre b
3) Figure C shows the motor area with the cover removed.
4) Reverse Steps 1-2 to install a new motor cover. NOTE: When reinstalling the motor cover, be sure to tuck the sides in so they do not bow
outward (Figure D).
fiGUre d
fiGUre C
32