Chapter 6: Engineering Mode; Using Engineering Mode; Using Service Mode - Matrix C5X-05 Service Manual

CHAPTER 6: ENgINEERINg ModE

6.1 USINg ENgINEERINg ModE

To enter Engineering Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager Mode appears on the middle LED display.
Press the LEVEL UP or DOWN key to scroll to Engineering Mode. Press ENTER to go into Engineering Mode.
CodE dEfAUlT oPTIoNS
Disable Errors No Yes or No
Speed Units Mile Mile or Kilometer
Machine Type C5x-04 C5x-01,C5x-02,
C5x-03,C5x-04
Pause Time 30 Seconds 15 - 120 Seconds
Serial Number N/A N/A
Club ID N/A N/A
Erp Time Off Off or On (1-30
Minutes)
E-Stop Switch On Off or On
E-Stop Setting 100 4-500
Audio Source Off Off / TV / PCTV /
Remote TV
Volume Control TV/ PCTV: 1~ 32
Output:13
Remote TV 1~ Max
Output:13
Remote TV 1~ 15
Input:15
Remote TV 1~ 32
Maximun:32
AM System WIFI WIFI/RF Radio
12
dESCRIPTIoN
No - Shows A-C class error codes. Yes - Shows only C class error codes.
Set for Mile or Kilometer.
This option selects the current model.
For AC powered frames only. This option controls the length of a user's pause
time before reset.
Serial Number input is available for both the Console and Frame. Use the
number keys and UP / DOWN LEVEL keys to enter Engineering Mode. Due to
the limited LED characters, 2 layers are used to enter the serial number. First
Layer:
- PPPPP V
- PPPPP is the product name (CS24 for the Climb Mill).
- V is the version. If the version is A, just leave this blank.
Second Layer
- YY MM nnnnn.
- YY is the year (11, 12).
- MM is the month (e.g. 08, 09, 10).
- nnnnn is the actual serial number.
Use the UP / DOWN LEVEL keys to navigate the layers and the number keys
to input the serial number. The product name is dependent on the Machine
Type setting.
For example, the console is CS19 with ver. A and the manufactured date is
2012.09 with 00123. The frame is CS24 with ver. A and the manufactured date
is 2014.06 with 99777. Their serial numbers are:
Console SN: CS19 1st layer, 120900123 2nd layer.
Frame SN: CS24 1st layer, 140699777 2nd layer.
This sets the club ID for clubs using Asset Management.
If there is no use of the machine over a period of time, the console LEDs will
turn off (go into sleep mode).
This option selects the E-Stop function.
Adjusts the touched point of the E-Stop.
a. Off – no TV (keypad will not operate)
b. TV – All normal MYE TVs.
c. PCTV – All PCTVs (net based TV).
d. Remote TV – Wall mounted TVs with 900MHz receiver.
Controls the default TV volume for entertainment wired through the C-Safe
port.
a. Input Default (DF : 15 / Range : 1 ~ 15)
b. Max Default (DF : 32 / Range : 1 ~ 32)
c. Output Default (DF : 13 / Range : 1 ~ Max)
Remote TV support a / b / c item. TV and PCTV only support c item.
To select AM output device by WIFI or RF Radio.
CHAPTER 7: SERVICE ModE

7.1 USINg SERVICE ModE

To enter Service Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager Mode appears on the middle LED display. Press
the LEVEL UP or DOWN key to scroll to Service Mode. Press ENTER to go into Service Mode.
CodE dEfAUlT
Service 1 Display Test
Service 2 Keypad Test
Service 3 Distance / Time
Service 4 CSafe / RF Test
Service 5 Error Log
Service 6 Current Time Display
Service 7 Export and Import Parameter
Service 8 WiFi Function
oPTIoNS dESCRIPTIoN
Press the ENTER key repeatedly
to check each set of LEDs on the
display sequentially.
Press any key and the display
should show the corresponding
message.
Distance: Manually sets the Accumulated
Mile 0 - 99999 Distance and Time.
Kilometer 0 - 160898
Time:
0 - 999999
Press the ENTER key to test
CSAFE. Press the ENTER key
again to test the RF.
Shows the last 10 errors. Press
and LEVEL UP and DOWN for 3
seconds to clear the errors.
Displays the current time
Export Parameter - Export the
engineer parameters to a USB
device (the file name will be
Premium C5x.backup).
Import Parameter 1 - Imports the
engineer parameters to a USB
device except serial number,
accumulated distance and time.
Import Parameter 2 - Imports the
engineer parameters to a USB
device.
Automatically detects and
displays WiFi Module status and
AP connected status and WiFi
MAC IP address.
13