Heart Rate Grips Replacement - Matrix T3X-05 Service Manual

CHaPTer 9: ParT rePlaCemeNT GUide

9.19 HearT raTe GriPS rePlaCemeNT

1) Turn off power to the treadmill and remove the power cord.
2) Remove the 2 Phillips screws holding the 2 halves of the HR grip together (Figure A).
3) Disconnect the white wire from the bottom HR terminal and remove it (Figure B).
fiGUre b
fiGUre a
4) Disconnect the red wire from the top HR terminal and remove it (Figure C).
fiGUre C
5) Reverse Steps 1-4 to install new HR grips.
6) Test the treadmill for function as outlined in Section 9.21.
55