Chapter 7: Service Mode; Using Service Mode; Service Mode Overview - Matrix T5X-07 Service Manual

7.1 USiNG SerViCe mode

1. To enter Service Mode, hold the INCLINE DOWN and SPEED DOWN
keys for three seconds until Manager Mode appears on the middle LED
display.
2. Press any DOWN arrow key and Service Mode will appear on the display.
3. Press ENTER once Service Mode is displayed.
4. To scroll between programs in the Service Mode, press any UP or DOWN
arrow key.
5. Press ENTER to modify the program settings once displayed.
6. Press any UP or DOWN arrow key to see value.
7. Press the EMERGENCY STOP to exit Service Mode.

7.2 SerViCe mode oVerVieW

CUSTom
SeTTiNGS
Service 1
Service 2
Service 3
Service 4
Service 5
Service 6
Service 7
14

CHaPTer 7: SerViCe mode

defaUlT
Display Test
KeypadTest
Accumulated Distance / Accumulated Time
CSafe / RF Test
Error Log Message
Setting the PCB System Date Data
Export and Import Parameter
oPTioNS deSCriPTioN
Press the ENTER key repeatedly to check each
set of LEDs on the display sequentially.
Press any key and the display should show the
corresponding message.
Distance: Manually sets the Accumulated Distance and
Mile 0 - 99999 Time.
Kilometer0-160898
Time:
0 - 999999
Press the ENTER key to test CSAFE. Press the
ENTER key again to test the RF.
Shows the last 10 errors. Press and LEVEL UP
and DOWN for 3 seconds to clear the errors.
Displays the current time
Export parameter : Export all parameter to USB
Import parameter 1: Import parameters to
console without accumulated distance and time
and serial
number.
Import parameter 2: Import parameters to
console Include accumulated distance and time
and serial number.