Using Several Handsets; Registering Handsets - Siemens Gigaset A580 IP User Manual

Using several handsets

Registering handsets

You can register up to six handsets to your base station.
When you register a new Gigaset handset, the base station transfers the corre-
sponding entries to its local directory to enable you to use online directories on
your new handset.
u
Select
Precondition: The handset can send and receive directory entries (see handset
user guide).
Successful registration is acknowledged with the message
rec for this reason.
Please note
u
If several handsets are registered on your base station, you can simultane-
ously make two calls via the Internet and one via the fixed line network. Up
to two additional internal connections are also possible.
u
Selecting the type of connection via the talk key (
ported on GAP handsets, i.e. if you enter a phone number without a line
suffix and without defining a dialling plan for the phone number it will be
dialled via the default line (
u
After registration, all the phone numbers for the phone will be assigned to
the handset as receive numbers. It will use the fixed line network number
and the first VoIP number in the configuration as send numbers.
For how to change the assignments,
Registering another Gigaset A58H handset on the Gigaset A580 IP
Before you can use your handset, you must register it to the base station.
You must initiate handset registration on the handset and on the base station.
The handset will return to idle status if registration was successful. The hand-
set's internal name is shown in the display, e.g.
repeat the procedure. Registration can take up to one minute.
¤
On the handset:
Select
¤
Enter the system PIN of the base station (the default is 0000) and press
Handset is registering
¤
Within the next 60 seconds press and hold (for approx. 3 seconds) the reg-
istration/paging key (
The handset is assigned the lowest available internal number (1-6). The inter-
nal number appears in the display after registration, e.g.
the internal number 2 has been assigned to the handset.
Gigaset.net for the Gigaset.net directory (
¢ ¢
Settings
§Menu§
flashes on the display.
£
Page
£
Page 97).
£
Page 133.
INT
¢
Handset Register Handset
2) on the base station.
Using several handsets
£
Page 50).
Data Transfer x entries
£
Page 39) is not sup-
1. If it does not appear,
and press
§OK§
INT 2. This means that
.
.
§OK§
81