Using Several Handsets; Internal Calls, Ending A Call; Changing The Name Of A Handset - Siemens Gigaset 150 Owner's Manual

Using several handsets

Internal calls, ending a call

Internal calls are calls with other handsets that are registered on the same base. These
calls are free.
Calling a specific handset or all handsets simultaneously.
[________]
INT
either ...
[__________]
or ...
... then
To call a specific handset, you can also enter the handset number after
N
you open the list, e.g.
i
If you receive a call during an internal call or group call, the group call
N
is not interrupted.

Changing the name of a handset

The names 'INT 1', 'INT 2' etc. are assigned automatically. However you can change
these names, e.g. to 'Anna' etc. (10 characters maximum). The changed name is dis-
played in the list of every handset.
[________]
INT
[__________] [________________]
MENU
[__________] [_____________________________________________________________]
Change Handset Name
[_______]
OK
Open list of handsets.
Call a specific handset:
Select the handset (your own handset is checked
and press the top half of the key.
Call all handsets ('group call'):
Press the star key. All handsets are called.
End the call:
Press the end call key.
2
INT
Open list of handsets.
Select the handset and press the display key.
Select the menu item and confirm.
[_________] Delete the old name with
OK
Enter the name and confirm.
Press the end call key.
Using several handsets
.
Û
.
‰
)
55