Siemens Gigaset A580 IP User Manual page 123

Web configurator – Setting the phone using a PC
Area: Personal Provider Data
Enter the configuration data that is required to access your VoIP provider's SIP
service. This data can be obtained from your VoIP provider.
The field names in this area
standard names and may change. If you have already downloaded the pro-
vider's general details
be replaced by provider-specific names to facilitate orientation (e.g. SIP-ID
instead of
Authentication Name
Specify the registration or authentication ID agreed with your VoIP provider
(maximum 32 digits). The registration ID serves as the access ID that your
phone must specify when registering with the SIP proxy/registrar server.
The Authentication Name
phone number.
Authentication password
Enter the password that you have agreed with your VoIP provider in the
tication password
word when registering with the SIP proxy/registrar server.
Username
Enter the caller ID for your VoIP provider account (maximum 32 characters).
This ID is usually identical to the first part of your SIP address (URI, your Internet
phone number).
Example
Example: If your SIP address is "987654321@provider.com", enter
"987654321" as the Username.
(optional)
Display name
Enter any name that should be shown in the other caller's display when you call
them via the Internet (example: Anna Sand). All characters in the UTF8 charac-
ter set (Unicode) are permitted. The name must not exceed 32 characters.
If you do not enter a name, your
displayed.
Ask your VoIP provider if this feature is supported.
122
(Authentication Name
("Select VoIP
Authentication Name).
is usually identical to the Username, i.e. to your Internet
field (maximum 32 characters). The phone needs the pass-
etc.) listed in the following are
Provider" button, see above), field entries will
Username or your VoIP phone number will be
Authen-