Configuring Call Transfer Via Voip - Siemens Gigaset A580 IP User Manual

Configuring call transfer via VoIP

If you are toggling calls via VoIP connections, you can connect the two external
callers (provider-dependent). You can configure settings for this type of call
transfer.
¤
Open the following Web page:
Area Call Transfer
¤
Make your settings for call transfer via VoIP in the following fields:
Use the R key to initiate call transfer with the SIP Refer method.
If you select Yes, the external parties you are toggling between will be con-
nected when you press the R key S. Your connections with the callers will be
terminated.
Transfer Call by On-Hook
If you select Yes, the external parties you are toggling between will be con-
nected when you press the end call key a. Your connections with the callers
will be terminated.
Preferred Refer To
Define the protocol (the contents of the "Refer To" information) to which prec-
edence should be given for call transfer:
Target's contact info
This protocol is recommended for "closed" networks (internal company and
business networks).
Original URL
This protocol is recommended when the base station is connected to the
Internet via a router with NAT.
Automatic Refer To
If you select Yes, the base station will automatically attempt to determine the
best protocol.
If the base station cannot determine the best protocol, it will use the protocol
defined in
¤
Now select
Please note
For information on how to forward a call when you deactivate both
key to initiate call transfer with the SIP Refer method.
£
Page
Preferred Refer To.
Set to save your settings.
59.
Web configurator – Setting the phone using a PC
¢
Settings Telephony
and
Transfer Call by
¢
Advanced Settings.
Use the R
On-Hook,
141