Radius [Not Applicable]; Encryption [Not Applicable] - Tadiran Telecom TGW1E1-2G User Configuration Manual

TGWxE1-2G PRI (ISDN) Trunk
Gateways Series for Aeonix
Name
Calling party number in call
transfer
Replace 18X with 180
Do not validate Via
Register upon invite timeout

5.5.10 RADIUS [Not Applicable]

Click the
Advanced > RADIUS
Note: Currently not in use and not applicable. Do Not Change the default settings

5.5.11 Encryption [Not Applicable]

Click the
Advanced > Encryption
Note: Currently not in use and not applicable. Do Not Change the default settings
5-34
Description
Under call forwarding, the calling party number sent can be set to Originating number
or Forwarding number. The default is Forwarding number.
For example: the subscriber line 2551111 on the gateway activates the call forwarding
feature and sets the destination to 3224422. When caller with 13055553333 calls
2551111, the call will be forwarded to 3224422:
If Originating number is selected, the number 13055553333 will be sent to

3224422 as the calling party number.
If Forwarding number is selected, the number 2551111 will be sent to 3224422 as

the calling party number.
Send 180: If this parameter is set, the gateway will map all alerting messages

(ALERTING with and without in-band indicator) to 180. An example of when this
parameter would be enabled is when an IAD does not support a 183 message.
Send 18x: If this parameter is set, the 18x message will be sent.

Set whether to ignore 'Via' field. By default, Via is ignored.
Set whether to activate registration when SIP message of INVITE is failed or time
expired. By default, re-registration is not selected.
tab to open this interface.
tab to open this interface.
User Configuration Manual
.
.