TGWxE1-2G PRI (ISDN) Trunk
Gateways Series for Aeonix
5.4 ISDN
In case of full configurations, the TGWxE1-2G has one 4T1/E1 card, with four interfaces numbering
ISDN1 to ISDN4 from left to right. It is recommended to set parameters corresponding to the interface
configured. Parameters for each interface are identical. You can set different parameter values for each
interface as needed. For parameter setting, take the ISDN1 as an example.
* Fill in the ISDN1/2/3/4 pages, according to your PRI service provider requirements.
ISDN1 - for all Tadiran TGWxE1-2G models.
ISDN2 - for Tadiran TGW4E1-2G and TGW2E1-2G models only.
ISDN3 - for Tadiran TGW4E1-2G models only.
ISDN4 - for Tadiran TGW4E1-2G models only.
Click the ISDN > ISDN1 tab to open the ISDN 1 configuration interface.
Figure 5-7 ISDN Configuration Interface 1
If it is necessary to configure link data, click Application to display the following configuration page:
5-14
User Configuration Manual
Need help?
Do you have a question about the TGW1E1-2G and is the answer not in the manual?
Questions and answers