TGWxE1-2G PRI (ISDN) Trunk
Gateways Series for Aeonix
5.5.1 Routing Table
Click the Advanced > Routing Table tab to open the Routing Table configuration interface.
* For Aeonix US ALARMS
Figure 5-10 Configuration Interface for Routing Table
Click Help to open the illustrative interface for routing configuration
The routing table with up to 500 rules, provides two functions:
digit transformation
call routing assignment
Here are the general rules applied by gateways when executing the routing table.
Rules must be filled out without any blank at the beginning of each line; otherwise, the data cannot
be validated even if the system prompts successful submittal.
The routing table is empty by default. The gateways will point a call to the SIP proxy server when
there is no matched rule for the call.
5-19
In order to disable the Echo Cancellation mechanism for port 2524, you
should add a Routing Map rule
ports
ISDN X CODEC PCMU/20/0.
User Configuration Manual
ISDN 2524 CODEC PCMU/20/0
and for all
Need help?
Do you have a question about the TGW1E1-2G and is the answer not in the manual?
Questions and answers