Security; Figure 5-14 Security Configuration Interface; Table 5-15 Security Configuration Parameters - Tadiran Telecom TGW1E1-2G User Configuration Manual

TGWxE1-2G PRI (ISDN) Trunk
Gateways Series for Aeonix

5.5.6 Security

Click the
Advanced > Security

Figure 5-14 Security Configuration Interface

Table 5-15 Security Configuration Parameters

Name
Telnet & SSH
service
Telnet
SSH
Password
Confirm password
Telnet port
SSH port
Ping service
Ping
Web service
HTTP port
5-29
tab to open this interface.
Description
Select the check box to enable the Telnet service. The terminals can access the TGW through
Telnet.
Select the check box to enable the SSH service. The terminals can access the TGW through
SSH.
The Telnet or SSH password consists of 6 to 20 bit case-sensitive characters (letters, digits, or
characters, such as !, @, #, $, %, and ^).
Re-enter the Telnet password.
The port used to access the TGW through Telnet. The value is 23 by default.
The port used to access the TGW through SSH. The value is 22 by default.
Block: the TGW does not respond to any Ping requests.
Unblock: the TGW responds to Ping requests.
The HTTP port used to access the TGW's Web GUI. The value is 80 by default.
User Configuration Manual