Tadiran Telecom TGW1E1-2G User Configuration Manual page 32

TGWxE1-2G PRI (ISDN) Trunk
Gateways Series for Aeonix
Name
*
Netmask
Gateway IP address
AUX
IP address
Netmask
DNS
*
Mode
Primary Server
Secondary Server
SNTP
Primary Server
Secondary Server
5-4
Description
The subnet mask is used with an IP address. When the TGWxE1 gateway uses a static IP
address of ETH, this parameter must be entered.
LAN gateway IP address where the TGWxE1-2G gateway is located.
The IP address used by an AUX interface to access the network gateway, which must be in a
different network segment than the IP address of the ETH interface.
The subnet mask is used with an IP address. When the gateways use a static IP address of
AUX, this parameter must be entered.
When the TGW accesses a site using domain name, you need to enable the DNS function and
specify a DNS server to resolve the domain name to the IP address.

Off: disable the DNS function.

Specified manually: enable the DNS function and use the DNS server specified
manually.

Obtained automatically: enable the DNS function and use the DNS server obtained
through DHCP or PPPoE.
For Aeonix  Select Obtained automatically.
If the mode is set to Specified manually, theIP address of primary DNS server must be
entered, and there is no default value.
If the mode is set to Specified manually,, the IP address of secondary DNS server can be
entered here. It is optional and there is no default value.
Enter the IP address of the preferred time server. This parameter must be set due to no default
value.
Enter the IP address of the standby time server. This parameter must be set due to no default
value.
User Configuration Manual