Table of Contents
Advertisement
Description of the terminal
Alphanumeric keypad
The alphanumeric keypad is used to enter texts. The input is based on key
correspondence with letters or signs.
Removable magnetic keypad
When a text input is proposed:
• Select the character you want by pressing the corresponding
key successively.
Example:
• Pressing the key 2 once displays the letter A.
• Pressing the key 2 twice displays the letter B.
• Pressing the key 2 three times displays the letter C.
• Pressing the key 2 four times displays the figure 2.
You can enter punctuation characters by pressing the 1 key
successively.
To enter a letter located on another key:
• Press another key immediately to enter the next letter based on
the same principle.
To enter another letter located on the same key:
• Wait (3 seconds) for the cursor to blink at the next position.
To enter a blank space:
• Press the * key twice.
To correct the text you are entering:
• Use the
or
corrected.
• Press the interactive
character.
• Enter the new character as indicated above.
For more comfort during input, the terminal may be
fitted with a removable keypad, powered by the
terminal. It is connected through simple magnetic
contact. Depending on configuration, it may work in
AZERTY, QWERTY or QWERTZ mode.
Ask your system operator for advice.
key to place the cursor after the letter to be
Backspace
key to delete the previous
- 4 -
Advertisement
Table of Contents
